for a Greener future

Al-Track G-212
Back to Foot Grilles / Next Product

Buffed nylon-reinforced truck and airplane tires provide the absorbent tread surface. Double-sided treads make symmetrical grates reversible. These grates also last longer than virtually any other type of textile entrance mat or grate.

Application:

High-traffic entryways

Features:

• Recycled tire treads have a buffed surface on both the top and bottom.
• Recycled aluminum divider bars separate treads.
• Treads and divider bars are bound with hard, cold galvanized steel wire inserted
perpendicular to treads through holes in the treads and bars.
• Channels in the divide bars provide a collection basin for dirt and moisture

Specifications:

• Materials: Recycled buffed rubber treads
with recycled aluminum divider bars
• Insert rails: alternating 6063-T52
• Inserts- See Insert Guide
• Thickness: 15/32" (11.9mm)
• Construction: Reversible
• Weight: Approx.3 Lbs per sq ft.
• Custom Sizes Available
• LEED™ Related Data

Colors available for Al-track G-212
Due to variations in monitor color representation,
please order samples when selecting colors.

Black

Natural Grey

Model	Application	Finishes	Frame Profile
ATF-9 Technical Details	RECESSED ANGLE FRAME	Mill, Clear Anodized, Bronze Anodized, Black Anodized
ATF-12 Technical Details	SURFACE MOUNT FRAME	Mill, Clear Anodized, Bronze Anodized, Black Anodized
ATF-13 Technical Details	RECESSED FRAME	Mill, Clear Anodized, Bronze Anodized, Black Anodized

LEED™ Related Data
Model Al-Track G-212

MR Credits 4.1, 4.2 – Recycled Content
This model contains a minimum of 59% post-consumer, 22% pre-consumer recycled content. Note that most aluminum has an actual post-consumer recycled content that is much higher, but at this time it is not possible to guarantee post-consumer recycled content for a specific batch or project.

EQ Credit 5 – Indoor Chemical & Pollutant Source Control
This product is intended for permanent installation. To meet this credit’s requirements for an entryway system, size product at least six feet in the traffic direction and maintain the product properly. Maintenance instructions are available in PDF format through the link on this page.

General note regarding sustainability and environmental impact:
While not a requirement for LEED, please note that cushions and hinges on all mats and grates are PVC-free. They are made from corn-based biopolymer blended with either recycled low-density or recycled high-density polyethylene.

Application:

Features:

Specifications:

LEED™ Related Data Model Al-Track G-212

LEED™ Related Data
Model Al-Track G-212