P-550 Thin line waffle Entrance Grates striations cut perpendicular to tread rails

for a Greener future

Al-Track P-550
Back to Foot Grilles / G SERIES

Model G-550P plain thin line grates have continuous I-beam tread rails and can be fabricated with curves and angles. Constructed with keylocks standard every three inches, thin line grates can stand up to almost any traffic.

Application:

High-traffic entryways

Features:

Aluminum thin line grates add a sleek, clean look to entrances. Both waffle-cut and plain thin line grates are available with flat, serrated or aluminum oxide grit treads.

Specifications:

• Materials: Aluminum Alloy
• Rails: Spaced 3/4", 19.1mm o.c.
• Key locks spaced 3", 76.2mm o.c.
• Treads joined by keylock bars
• Extruded vinyl tread cushions spaced 24", 609.6 mm o.c.
• LEED™ Related Data

Colors available for Al-track P-550
Due to variations in monitor color representation,
please order samples when selecting colors.

Model	Application	Finishes	Frame Profile
ATF- 1 Technical Details	LEVEL BED FRAME	Mill, Clear Anodized, Bronze Anodized, Black Anodized
ATF- 1AB Technical Details	LEVEL BED FRAME	Solid Bronze
ATF- 2 Technical Details	DEEP PIT FRAME	Mill, Clear Anodized, Bronze Anodized, Black Anodized
ATF- 2AB Technical Details	DEEP PIT FRAME	Solid Bronze
ATF- 2T Technical Details	THIN SLAB FRAME	Mill, Clear Anodized, Bronze Anodized, Black Anodized
ATF- LANG Technical Details	LARGE ANGLE FRAME	Mill, Clear Anodized, Bronze Anodized, Black Anodized

LEED™ Related Data

EQ Credit 5 – Indoor Chemical & Pollutant Source Control

This product is intended for permanent installation. To meet this credit’s requirements for an entryway system, size product at least six feet in the traffic direction and maintain the product properly. Maintenance instructions are available in PDF format through the link on this page.

General note regarding sustainability and environmental impact:

While not a requirement for LEED, please note that cushions and hinges on all mats and grates are PVC-free. They are made from corn-based biopolymer blended with either recycled low-density or recycled high-density polyethylene.